:woowoo:
Exclusivity has it's privileges
Exclusivity has it's privileges
Ronald G Wainwright+
Got my DTM rear spoiler*painted & on car now*& adjus
:woowoo:
Exclusivity has it's privileges
Exclusivity has it's privileges
Attachments
I convientley have tomorrow off & plan on bringing it down to my body guy to prep & paint it.3B'dB3 said:
More pics are sure to follow.
I think it's project thread time
Yes I NEED a set of LM's :drool:, I'm close though..real close.Wizard-of-OD said:
& I need the front spliter (front spoiler).
Total shipped to my door was $380.
But it doesn't matter now cause Paul has only like 1 or 2 more..& I'm not sure he even has that many left! & he said he's not making anymore cause the intrest in these turned out to be not worth it $$ wise to Paul.
Of all the V8, 200 20v, & even the 5ktq, & 200 10v guys in the States I'M the ONLY one who bought one from Paul! But thats k00l with me. I'm 1 of 2 :-D
But it doesn't matter now cause Paul has only like 1 or 2 more..& I'm not sure he even has that many left! & he said he's not making anymore cause the intrest in these turned out to be not worth it $$ wise to Paul.
Of all the V8, 200 20v, & even the 5ktq, & 200 10v guys in the States I'M the ONLY one who bought one from Paul! But thats k00l with me. I'm 1 of 2 :-D
if Paul was to make a trick body kit for the early type 44's like my 5ktq id be down. Paul needs to do some R&D here in the states to see what we want b/c theres quite a following for any of the "good stuff" like euros, chin spoliers, smoked or v8 tails. but the best thing he could make is a center console that has cup holders for the 5ktq and the early 200's.
BTW Ron nice DTM. cant wait to see it on the ride.
BTW Ron nice DTM. cant wait to see it on the ride.
Well Paul has in the past, problem occurs with alot of people saying, "yeah that looks great" but when they see how much it costs to ship an item here from Germany, well most people back down.
Check his site for alot of goodies he already makes for our cars.
http://homepage.internet.lu/customautoc ... 200_v8.htm
Check his site for alot of goodies he already makes for our cars.
http://homepage.internet.lu/customautoc ... 200_v8.htm
tru. Paul should really move back to the USA it would make things a whole lot easier.
And as you said the cost of shipping is what turns most people off from buying his stuff.
And as you said the cost of shipping is what turns most people off from buying his stuff.
yah I hear that there's one on the West Coast. But I only seen a very small mention of a true DTMV8 in someones shop or something out in Kali.Toxcheap said:
But yah it adjusts via some allen head bolts on the inside of the spoiler. Instead of holes there elongated from top to bottom & looks like you can go from 0" & bring it up 3" or so.
The guy at the local dealer body shop wasn't in today
, so I have to wait till Monday to bring him the spoiler to have one of the guys prep & paint it.& looks like I'm 1 of 3 now
but at least I'm one of..now time to get my hands on a front splitter, & some BBs LM's.The motor & trans have been shipped from Florida & should be here in a bit.
If by next Summer there are reports of Earthquakes in the greater New England area, that's just me pounding the pavement in Der DTM8
wow. sweet. where was this?Toxcheap said:Ron this is the one I saw this week, look like a true DTM?Ronald G Wainwright+ said:
So I went through the pics & vid links but didn't see any of the DTMV8, sept the pic you posted Myke. I seen Javad mention that the car came from Eurospec, but that looks like a diffrent car than I seen on there web site. They said they had Mr Stucks DTMV8 & thats a diffrent car than the pic posted by Myke. But Javad did make refrence in a previouse thread & posted a pic of the one Eurospec has that was Hans's car.
Unless they made a repro...or have 2 true DTMV8's?
But I still haven't seen but 2 pics & a faint mention of someone doing somekinda work to a DTMV8. <shakes head back & forth>
I don't know, I need more info or something!
Unless they made a repro...or have 2 true DTMV8's?
But I still haven't seen but 2 pics & a faint mention of someone doing somekinda work to a DTMV8. <shakes head back & forth>
I don't know, I need more info or something!
Well in order for me to see one in person & not in pics I must make one. Then I'll be able to look at it every day!
But nice pic Myke, shows the diffrences between the earley & late versions of the motor dressing. I think I need to get in touch with Keith & bounce some intake ideas off him.
But nice pic Myke, shows the diffrences between the earley & late versions of the motor dressing. I think I need to get in touch with Keith & bounce some intake ideas off him.
This suits me a little betterChad T said:Oh man. You gotta get a set of those intake manis and airboxes!
Attachments
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
