CQ shell has been scrapped.
Have pictures of just about everything to be emailed by request.
I also have an s2 front mount with cross tube, it was in a low speed collision. 1 small dent and a pulley mark in the fins but it holds pressure.
stainless 2.5" cq exhaust, custom made, tig welded, vibrant muffler and resonator.
2000 v8 a6, needs trans work or something. Wont move under its own power, from mass, pretty clean. Had rebuilt trans 2 years ago. 800$ good swap car. Bring a trailer with a winch!
abz v8, unknown mileage, not even sure if it runs. Turns over good, modified oil pan for small chassis. Have most of a wiring harness, maf, ecu, intake tubing, icm's. Custom made 1/4 plate aluminum mounts for small chassis
pt v8
Sold
driver window reg. (still have motor)
3b ecu and engine harness
C-pillar trim
LF kick panel
Turbo inlet pipe
HVAC controller
Cigarette lighter
mirror switch
tail lights
S2 rear bumper
- b4 depo's 75$ shipped
1 set b3 headlights 60$ shipped
Good window regulators 125$ shipped
s2 front and rear bumpers, front bumper missing washer nozzles and needs some work 200$ picked up
2 black dashes 20$ ea. picked up
black leather cq seats, about 43k miles on them 150$ picked up
black leather cq door card set, no door pulls, fronts need leather re-glued 100$ shipped
faded black cq cargo cover, unbroken corners 60$ picked up, might be able to ship this
7a engine harness, and ecu 75$ shipped
Have pictures of just about everything to be emailed by request.
I also have an s2 front mount with cross tube, it was in a low speed collision. 1 small dent and a pulley mark in the fins but it holds pressure.
stainless 2.5" cq exhaust, custom made, tig welded, vibrant muffler and resonator.
2000 v8 a6, needs trans work or something. Wont move under its own power, from mass, pretty clean. Had rebuilt trans 2 years ago. 800$ good swap car. Bring a trailer with a winch!
abz v8, unknown mileage, not even sure if it runs. Turns over good, modified oil pan for small chassis. Have most of a wiring harness, maf, ecu, intake tubing, icm's. Custom made 1/4 plate aluminum mounts for small chassis
pt v8
Sold
driver window reg. (still have motor)
3b ecu and engine harness
C-pillar trim
LF kick panel
Turbo inlet pipe
HVAC controller
Cigarette lighter
mirror switch
tail lights
S2 rear bumper