Automobiles Forum banner

Delrin a arm bushings need help

2K views 4 replies 4 participants last post by  audiPete 
#1 ·
So I ordered some 034 Delrin a arm solid Delrin bushings had my old ones with the metal sleeves pressed out now the new ones are way too small am I suppose to leave the sleeves in our did 034 send me the wrong ones the small ones is what they said I needed.
 
#3 ·
There are 2 different bushings for the small chassis. The forged arms use much larger bushings than the stamped arms.
 
#5 ·
and you don't want to use Delrin bushings in the stamped arms.
The arms will crack, have seen this on two cars, one at the track (eek)
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top