Automobiles Forum banner
1 - 10 of 10 Posts

·
Registered
Joined
·
3,249 Posts
Discussion Starter · #1 ·
Solid 3D printed Nylon 016 shifter bushings (replace Audi p/n 431711221). Firm up the shifter feel and won't disintegrate in a tank of gas like other replacement options.

I've been running this on my UrQ for the last 5k miles and it's been great! Much more durable and heat resistant than printing out of PLA or ABS. Recommend installing with a dab of grease on the inside of the cup.

$30 shipped for 1 within USA

+$20 for additional ones if you want more than one

Message me for international requests.

All credit to Steven for the original design. Just helping those that don't have 3D printers or ones that can't print Nylon. https://www.thingiverse.com/thing:2558263

DIY instructions: https://drive.google.com/file/d/1hso8Gz ... sp=sharing

96025410_10113667721972538_2231471303976550400_o by Vex Art Media, on Flickr
 

·
Registered
Joined
·
3,249 Posts
Discussion Starter · #3 ·
PM replied.
Out of stock until mid-September
 

·
Registered
Joined
·
3,249 Posts
Discussion Starter · #4 ·

·
Registered
Joined
·
2 Posts
Solid 3D printed Nylon 016 shifter bushings (replace Audi p/n 431711221). Firm up the shifter feel and won't disintegrate in a tank of gas like other replacement options.

I've been running this on my UrQ for the last 5k miles and it's been great! Much more durable and heat resistant than printing out of PLA or ABS. Recommend installing with a dab of grease on the inside of the cup.

$30 shipped for 1 within USA

+$20 for additional ones if you want more than one

Message me for international requests.

All credit to Steven for the original design. Just helping those that don't have 3D printers or ones that can't print Nylon. https://www.thingiverse.com/thing:2558263

DIY-Anleitung: https://drive.google.com/file/d/1hso8Gz ... sp=sharing

96025410_10113667721972538_2231471303976550400_o von Vex Art Media , auf Flickr
[/ZITIEREN]
Hello from Germany, do you currently have ball sockets to be able to deliver to germany?
 

·
Registered
Joined
·
1 Posts
Solid 3D printed Nylon 016 shifter bushings (replace Audi p/n 431711221). Firm up the shifter feel and won't disintegrate in a tank of gas like other replacement options.

I've been running this on my UrQ for the last 5k miles and it's been great! Much more durable and heat resistant than printing out of PLA or ABS. Recommend installing with a dab of grease on the inside of the cup.

$30 shipped for 1 within USA

+$20 for additional ones if you want more than one

Message me for international requests.

All credit to Steven for the original design. Just helping those that don't have 3D printers or ones that can't print Nylon. https://www.thingiverse.com/thing:2558263

DIY instructions: https://drive.google.com/file/d/1hso8Gz ... sp=sharing

96025410_10113667721972538_2231471303976550400_o by Vex Art Media, on Flickr
Hi! How are you doing? Would you please sell couple of these for me? Thank you
 
1 - 10 of 10 Posts
Top