Automobiles Forum banner
1 - 10 of 10 Posts

·
Registered
Joined
·
238 Posts
Discussion Starter · #1 ·

So what bumper and middle lens is this? Im assuming its rs2 but I have been known to be very wrong at times. . .

I absolutely love the look this gives the sedan and want to know more for the future.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
 

·
Registered
Joined
·
2,398 Posts
you're right, res2 rear lens and bumper. the original rs2 bumper will not fit b3 cars, it does however fit b4's. it's too wide.

so what b3 cars do is either hack up and shorten it or cut out the license frame and weld it to an S2/coupe rear bumper.

the lens doesn't match the contour of coupes unfortunately. so you have to do some fenangling/spacing to get it to fit.

here it is on my coupe






(sorry, i can't tell which photo is which while i'm on this computer so i can't just post the rear shots of it)
 

·
Registered
Joined
·
238 Posts
Discussion Starter · #6 ·
Also, glad you posted your pics. What grill is that? I was thinking a similar setup with 1 piece HLs and a b3 hood. I know the 1 pieces coming with the car are b4s iirc.

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
 

·
Registered
Joined
·
2,398 Posts
lol do you really wanna know what grill that is? it's my second one i've made.

it's an early Plymouth Voyager grill, hacked up some to fit. works perfectly. counter is right and the bars sit almost flush to the top and bottom of the headlights. If you get B3 1 piece headlights you can run a stock style b3 grill off a cq or 80.

The rs2 plate will work just fine with the b3 sedans, it's the same tail lights, it has a little bit of a bend in it. There won't be any gap to the sides of the plate either.
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top