[Adam Mowafy]

I brought the Audi home tonight to start pulling the 10V out and start getting things together for the V8 Twin turbo project I have planned for this winter. There motor ran great until a couple months ago when it hydrolocked with gas and broke a piston ring. Still runs fine, it just blows some blue smoke from the broken oil ring. But I'm getting out of the 5cyl world. Onto bigger and better (more expensive) things.

So as of now All of my 10V goodies are for sale:

-NF head ported, polished/gasket matched, 3 angle valve job, new exhaust valves, valve seals, and valve guides done under 10k miles ago. Also did the 3 port coolant mod for cooler cyl head temps

-ARP Head Studs

-6 puck ceramic metallic unsprung performance clutch disk from kennedy Engineering, MC-2 pressure plate/throwout bearing and freshly resurfaced lighter MC-2 flywheel (about 4k miiles on all parts)

-Custom Tubular Exhaust header with T3 turbo flange and stock Audi wastegate flange. Designed to utilize dual scroll turbo setups. Made from Schedule 40 pipe and 1/2 inch flanges

-Polished Intake manifold w/ modified throttle body for Round silicone hose, while still using the stock Idle valve port.

-custom 3" downpipe with V band turbo clamp and stock Audi Wastegate flex pipe

-complete 3" exhaust with ATR muffler/resonator

-Holset HX35 turbo (dodge cummins 5.9L). Polished cold side housing and roughly 4k miles since it's complete rebuild by Evergreen Turbo.

-034 EFI fuel rail for EFI conversion/ stainless braided lines and anodized AN fittings

-Custom front snub motor mount bracket and polyeurothane snub mount

- 2 year old Idle valve

-I may have the custom Intercooler/piping/blow off valve, and silicone hoses for sale as well

Email me if interested in any parts. adammowafy@hotmail.com

Thanks guys.....and wish me luck. It's going to be another winter with no quattro. But this time it's certainly worth the wait *Grin*

 

[Adam Mowafy]

All the clutch stuff, fuel rail/lines/fittings, and IC/piping/Bov is now sold.

 

[Adam Mowafy]

NF head and ARP head studs are now sold

Still for sale:

-HX35 turbo with fairly fresh rebuild
-Custom Tubular Exhuast manifold
-3 inch downpipe
-Full 3 inch exhaust with ATR muffler
-Snub mount cross member bracket w/mount
-Polished intake manifold with modified throttle body

 

[Adam Mowafy]

Boxerfan just came and picked up the Bottom end, clutch parts, fuel rail/lines, Holset turbo, and some misc items I gave away. Nice to meet you Andrew!

The header and downpipe are still for sale. I'll make a great deal on them.

 

[Adam Mowafy]

Intake is NLA. Throttle body is 50 plus shipping. 75 if you want the S4 TPS with it. nearly new.

 

[Adam Mowafy]

It is a modified MC throttle body. The teardrop shape was converted to be round by a local aluminum shop. The ISV port is still functional. Yes the S4 TPS is for use with Megasquirt or 034.

 

[Adam Mowafy]

Throttle body is sold.

 

[Adam Mowafy]

Ill have a used megasquirt 2.2 board for sale very soon......

 

[Adam Mowafy]

Header and downpipe/WG are now sold.

 

[Adam Mowafy]

Megasquirt and harness are now sold

 

[Adam Mowafy]

Turbo was sold as well