Author |
Message |
nsimps
|
Post subject: 17z Caliper Bracket Group Buy. $215 shipped with hardware Posted: Sat Nov 09, 2019 10:05 pm |
|
 |
mach 2 with my hair on fire |
 |
Joined: Sun Mar 27, 2011 8:37 pm Posts: 1015 Location: Utah
|
These are for the same group buy that Chris Brydon and I did back in 2015. I didn't have a URS at the time so didn't get a set. Now I do so I need to do another run. - Info in the link for the brackets. - Fitment: - G60 uprights (URS4/6) - URQ with B5 rotors Pricing: - $215 shipped to USA - Deposit of $100 Time Frame: Hoping to have these done and shipping out by December. http://brydon-eng.com/catalog/products/audi-c4-urs4urs6-caliper-brackets/
_________________ - Nick cheerios.drop(); tires.kick(); fires.light();
#WantAnR8 (I win!)
Last edited by nsimps on Sat Nov 09, 2019 10:15 pm, edited 1 time in total.
|
|
Top |
|
|
|
 |
blackghost
|
Post subject: Re: 17z Caliper Bracket Group Buy. $215 shipped with hardwa Posted: Sat Nov 09, 2019 10:07 pm |
|
 |
I sprinkle rubber on my Cherios |
 |
Joined: Fri Nov 09, 2007 2:11 pm Posts: 378 Location: Mankato, MN
|
Don’t forget to mention that these can be used on URQ uprights as well with b5 rotors.
_________________ MEGASQUIRT RUNS!!!
|
|
Top |
|
|
 |
pilihp2
|
Post subject: Re: 17z Caliper Bracket Group Buy. $215 shipped with hardwar Posted: Sun Nov 10, 2019 11:37 am |
|
 |
I post, therefore I am |
 |
Joined: Sun Oct 26, 2008 10:52 pm Posts: 3229 Location: Reno, NV
|
It'll also technically fit 20020v and v8 cars with g60's. It'll fit 5k's as well if swapped to 200/v8 front hubs
_________________ -Phil 87 5ktq - 3b swap, VEMS "TurdQuat" 91 v8 - 5spd 05 s4 - "Daily"
|
|
Top |
|
|
 |
landfill
|
Post subject: Re: 17z Caliper Bracket Group Buy. $215 shipped with hardwar Posted: Sun Nov 10, 2019 2:50 pm |
|
 |
kickin' tires'n lightin fires |
Joined: Wed Sep 16, 2015 1:17 pm Posts: 918
|
|
Top |
|
|
 |
triplock
|
Post subject: Re: 17z Caliper Bracket Group Buy. $215 shipped with hardwar Posted: Sun Nov 10, 2019 2:56 pm |
|
 |
Stuck in first |
 |
Joined: Mon Oct 24, 2016 7:35 pm Posts: 19
|
Can you run oem 15” wheels on a urq with this setup? Thanks.
Sent from my iPhone using Tapatalk
|
|
Top |
|
|
 |
landfill
|
Post subject: Re: 17z Caliper Bracket Group Buy. $215 shipped with hardwar Posted: Sun Nov 10, 2019 5:38 pm |
|
 |
kickin' tires'n lightin fires |
Joined: Wed Sep 16, 2015 1:17 pm Posts: 918
|
17z require 17” wheels on any platform as far as I know.
4 piston calipers fit behind 15” & 16” wheels.
|
|
Top |
|
|
 |
blackghost
|
Post subject: Re: 17z Caliper Bracket Group Buy. $215 shipped with hardwar Posted: Sun Nov 10, 2019 7:33 pm |
|
 |
I sprinkle rubber on my Cherios |
 |
Joined: Fri Nov 09, 2007 2:11 pm Posts: 378 Location: Mankato, MN
|
triplock wrote: Can you run oem 15” wheels on a urq with this setup? Thanks.
Sent from my iPhone using Tapatalk Not sure any big brakes will fit behind 15”wheels.
_________________ MEGASQUIRT RUNS!!!
|
|
Top |
|
|
 |
Berserker
|
Post subject: Re: 17z Caliper Bracket Group Buy. $215 shipped with hardwar Posted: Mon Nov 11, 2019 1:10 pm |
|
 |
kickin' tires'n lightin fires |
Joined: Mon Feb 21, 2005 3:29 pm Posts: 843 Location: Chicago, IL
|
blackghost wrote: Not sure any big brakes will fit behind 15”wheels. Boxster (non-s) front calipers, on RS2 brackets (milled 2 mm on mating face to strut), with 312x25 A8 rotors turned down to 300 mm, fit under the 15x8 ronals.
_________________ Nathan Engelbert 83 UrQ DA900453 95 S6 avant
|
|
Top |
|
|
 |
triplock
|
Post subject: Re: 17z Caliper Bracket Group Buy. $215 shipped with hardwar Posted: Mon Nov 11, 2019 7:41 pm |
|
 |
Stuck in first |
 |
Joined: Mon Oct 24, 2016 7:35 pm Posts: 19
|
Thanks guys!
Sent from my iPhone using Tapatalk
|
|
Top |
|
|
 |
landfill
|
Post subject: Re: 17z Caliper Bracket Group Buy. $215 shipped with hardwar Posted: Tue Nov 19, 2019 2:40 am |
|
 |
kickin' tires'n lightin fires |
Joined: Wed Sep 16, 2015 1:17 pm Posts: 918
|
Any chance for CQ to get included? I’d take a set for 17z with urS front hubs.
|
|
Top |
|
|
 |
landfill
|
Post subject: Re: 17z Caliper Bracket Group Buy. $215 shipped with hardwar Posted: Tue Nov 26, 2019 10:06 pm |
|
 |
kickin' tires'n lightin fires |
Joined: Wed Sep 16, 2015 1:17 pm Posts: 918
|
|
Top |
|
|
 |
ejfluhr
|
Post subject: Re: 17z Caliper Bracket Group Buy. $215 shipped with hardwar Posted: Mon Dec 09, 2019 1:43 am |
|
 |
Redline? |
 |
Joined: Sun Jun 14, 2009 1:35 am Posts: 169 Location: Austin, TX
|
There are a few rotors at ~296-305mm diameter with 68mm center hole that seem interesting candidates for a custom bracket, e.g. Mazda 3 or some Volvo S60 variants, also I think a Maxima rotor. I've often wondered if these could fit under 15" wheels with Boxster/BoxsterS calipers. I'm guessing Chris could knock out a set of brackets?
|
|
Top |
|
|
 |
Lou
|
Post subject: Re: 17z Caliper Bracket Group Buy. $215 shipped with hardwar Posted: Tue Dec 10, 2019 3:17 pm |
|
 |
Stuck in first |
Joined: Wed Jan 16, 2019 7:29 pm Posts: 12
|
I have a set of 17z calipers for my 200. Does the UrQ w/ b5 rotors fitment cross over to the 200? Ill see what I can find myself
|
|
Top |
|
|
 |
jlw
|
Post subject: Re: 17z Caliper Bracket Group Buy. $215 shipped with hardwar Posted: Fri Mar 26, 2021 6:54 pm |
|
 |
I sprinkle rubber on my Cherios |
Joined: Sat Jan 08, 2011 9:36 pm Posts: 224 Location: Pennsylvania
|
Does anyone still make 17z brackets for 200's with g60?
_________________ 87 QSW 88 Q sedan 91 20vt Avant 04 s60 R 16 Golf Sportwagen- sold 08 Passat wagon tsi 6spd- goner
|
|
Top |
|
|
 |
yodasfro
|
Post subject: Re: 17z Caliper Bracket Group Buy. $215 shipped with hardwar Posted: Sat Mar 27, 2021 7:50 am |
|
 |
:blog: |
 |
Joined: Fri Jul 30, 2004 1:38 pm Posts: 12563 Location: CT
|
Pretty sure Nick still does there was a post on FB in one of the groups about it recently.
_________________ Austin 90 90Q 20v 91 200 20v avant 03 S6 avant
|
|
Top |
|
|
 |
nsimps
|
Post subject: Re: 17z Caliper Bracket Group Buy. $215 shipped with hardwar Posted: Sat Mar 27, 2021 8:16 am |
|
 |
mach 2 with my hair on fire |
 |
Joined: Sun Mar 27, 2011 8:37 pm Posts: 1015 Location: Utah
|
yodasfro wrote: Pretty sure Nick still does there was a post on FB in one of the groups about it recently. I’m a bit absent on Facebook for the time being but am still having sets made when people want them done. About to have another couple made. Contact me here or on Facebook messenger and I can help out. NOTE: I do not know for sure if these will work with the 200 G-60 uprights but as long as they are the same as the URS then should be good to go. Cheers  Sent from my iPhone using Tapatalk
_________________ - Nick cheerios.drop(); tires.kick(); fires.light();
#WantAnR8 (I win!)
|
|
Top |
|
|
 |
jlw
|
Post subject: Re: 17z Caliper Bracket Group Buy. $215 shipped with hardwar Posted: Sat Mar 27, 2021 2:48 pm |
|
 |
I sprinkle rubber on my Cherios |
Joined: Sat Jan 08, 2011 9:36 pm Posts: 224 Location: Pennsylvania
|
nsimps wrote: yodasfro wrote: Pretty sure Nick still does there was a post on FB in one of the groups about it recently. I’m a bit absent on Facebook for the time being but am still having sets made when people want them done. About to have another couple made. Contact me here or on Facebook messenger and I can help out. NOTE: I do not know for sure if these will work with the 200 G-60 uprights but as long as they are the same as the URS then should be good to go. Cheers  Sent from my iPhone using Tapatalk Awesome thanks, will be in touch. Good question.. i always assumed the uprights were the same as theyre both g60's but sure.. Anyone? Austin? thanks
_________________ 87 QSW 88 Q sedan 91 20vt Avant 04 s60 R 16 Golf Sportwagen- sold 08 Passat wagon tsi 6spd- goner
|
|
Top |
|
|
 |
yodasfro
|
Post subject: Re: 17z Caliper Bracket Group Buy. $215 shipped with hardwar Posted: Sun Mar 28, 2021 9:25 am |
|
 |
:blog: |
 |
Joined: Fri Jul 30, 2004 1:38 pm Posts: 12563 Location: CT
|
They should be the same unless someone put 10v housings on the car which would be rare.
_________________ Austin 90 90Q 20v 91 200 20v avant 03 S6 avant
|
|
Top |
|
|
 |
|
|