FS/Partout 1989 Audi 80Q NG :: motorgeek.com

jolio1994 · **Joined:** Wed Jan 11, 2017 8:46 pm **Posts:** 328

I purchased this 80 last week sight unseen and had it delivered to my house. I've done almost a full inspection and to get the car back roadworthy (to me) isn't worth it. Rather than scrap it I'd like to keep other B3 80's on the road so if you need parts, now's the time! I would also be willing to sell it as a whole, so PM me if your interested. Motor and trans will come out next weekend if not and I'll begin a full partout.

It was daily driven 5 years ago and then parked after Winter; it's sat ever since. The starter doesn't work, but the engine should be good. Trans feels great shifting with the car off (again, I haven't started it)

20191218_155254 by Joel Francisco

20191218_155245 by Joel Francisco

20191218_155222 by Joel Francisco

20191218_155231 by Joel Francisco

20191218_085841 by Joel Francisco

20191218_085715 by Joel Francisco

20191218_155307 by Joel Francisco

quattrofan · **Joined:** Wed Jun 01, 2016 9:27 am **Posts:** 255

Do B3 seats fit into a B2?

quattrofan · **Joined:** Wed Jun 01, 2016 9:27 am **Posts:** 255

Do B3 seats fit into a B2?

Curious if the hood from an b3 80/90/cq would fit a b2

varia · **Posted:** Fri Dec 20, 2019 2:34 pm

quattrofan wrote:

Do B3 seats fit into a B2?

Curious if the hood from an b3 80/90/cq would fit a b2

on the roof, yes

quattrofan · **Joined:** Wed Jun 01, 2016 9:27 am **Posts:** 255

varia wrote:

quattrofan wrote:

Do B3 seats fit into a B2?

Curious if the hood from an b3 80/90/cq would fit a b2

on the roof, yes

Of course it would fit on the roof especially with crossbars

but can it fit as a replacement even with some rework? Never looked at a b3 close up and always wondered what dimensions were changed

PRY4SNO · **Posted:** Fri Dec 20, 2019 8:30 pm

DE80q · **Joined:** Fri Oct 14, 2011 4:56 pm **Posts:** 4584

Keep me in mind Joel. I thought of another thing too... Shoot me a text if you feel like it.

landfill · **Joined:** Wed Sep 16, 2015 1:17 pm **Posts:** 918

B2 and b3 hoods are completely
different. Go on car-part.com and
find a yard with a coupe gt. Or search
for one of those fiberglass replacements
from Latvia.

jolio1994 · **Joined:** Wed Jan 11, 2017 8:46 pm **Posts:** 328

Took some time today to pull the front end off.
-Bumper has a small crack, but otherwise good condition. $100
-Headlights and turns are great. $140
-Radiator looks like it's new. Shroud and fan are all still attached. $80
-Hood has no dings $50

Tomorrow will be the engine and then I'll start to tear into the interior.

20191223_165016 by Joel Francisco

20191223_173430 by Joel Francisco

20191223_173435 by Joel Francisco

AJMN · **Joined:** Thu Jan 09, 2020 6:18 pm **Posts:** 8

Do you have the plastic caps for the front bumper that cover the bumper bolts behind the headlight washers?

AJ

jolio1994 · **Joined:** Wed Jan 11, 2017 8:46 pm **Posts:** 328

AJMN wrote:

Do you have the plastic caps for the front bumper that cover the bumper bolts behind the headlight washers?

AJ

Key word "Had"

Not anymore sorry

AJMN · **Joined:** Thu Jan 09, 2020 6:18 pm **Posts:** 8

2nd request: what about the idle and WOT switches on the throttle body?

mikekisss · **Joined:** Sun Sep 06, 2009 4:17 pm **Posts:** 4

I'd like to purchase the rear Audi rings emblem and the passenger side C-pillar trim. Thanks!

AJMN · **Joined:** Thu Jan 09, 2020 6:18 pm **Posts:** 8

Do you still have the a-pillar trims from this one?

Nasty90 · **Posted:** Sat Dec 19, 2020 6:30 pm

Rear calipers left?

FS/Partout 1989 Audi 80Q NG

Information