motorgeek.com
https://www.motorgeek.com/

ISO: front and rear calipers and brackets
https://www.motorgeek.com/viewtopic.php?f=4&t=219221
Page 1 of 1

Author:  RennenMsports [ Wed Dec 23, 2020 1:31 pm ]
Post subject:  ISO: front and rear calipers and brackets

Doing a 5 bolt swap and have urs front hubs at all 4 corners.

Author:  varia [ Wed Dec 23, 2020 8:35 pm ]
Post subject:  Re: ISO: front and rear calipers and brackets

RennenMsports wrote:
Doing a 5 bolt swap and have urs front hubs at all 4 corners.


on what car ?

Author:  RennenMsports [ Thu Dec 24, 2020 7:19 am ]
Post subject:  Re: ISO: front and rear calipers and brackets

Oops. 91’ 80q. With a 6mm spacer
Attachment:
9D70CC89-07F5-4B15-B1E9-094335084974.png
9D70CC89-07F5-4B15-B1E9-094335084974.png [ 3.24 MiB | Viewed 220 times ]

Attachment:
015A6E35-DA18-455D-9D75-219D2829F2DF.jpeg
015A6E35-DA18-455D-9D75-219D2829F2DF.jpeg [ 3.33 MiB | Viewed 218 times ]

Author:  varia [ Thu Dec 24, 2020 9:07 am ]
Post subject:  Re: ISO: front and rear calipers and brackets

im not sure if i understand how did you install urs4/6 hub on the rear of a B3 80q

Isnt those are 82mm instead of the 75?

Author:  RennenMsports [ Thu Dec 24, 2020 9:28 am ]
Post subject:  Re: ISO: front and rear calipers and brackets

varia wrote:
im not sure if i understand how did you install urs4/6 hub on the rear of a B3 80q

Isnt those are 82mm instead of the 75?

I must use wheel bearing 33412220987 from a bmw e36. And machine the hubs to roughly 42.2 mm according to the guy I got the shafts from

Author:  RennenMsports [ Thu Dec 24, 2020 10:54 am ]
Post subject:  Re: ISO: front and rear calipers and brackets

I would like to use urs front and rear brakes but either way they have to fit behind these wheels. The guy said something about using c5 s6 269mm and/or c5 A6 4.2l 269mm rotors but I’m not sure exactly.
Attachment:
229D76E7-F9C0-45CA-BF0C-F3074C7850CF.png
229D76E7-F9C0-45CA-BF0C-F3074C7850CF.png [ 1.14 MiB | Viewed 209 times ]

Author:  varia [ Thu Dec 24, 2020 10:56 am ]
Post subject:  Re: ISO: front and rear calipers and brackets

ahh ok, good luck with it.

I have hard time understanding why ppl over-complicating a simple thing, like 5 lug conversion with off-shelf parts

Author:  RennenMsports [ Thu Dec 24, 2020 1:08 pm ]
Post subject:  Re: ISO: front and rear calipers and brackets

Ok thanx. Over complicating things keeps my brain entertained. Cars bring me peace of mind and the ability to stay out of trouble. I also tend to over engineer things. I’m sorry if I frustrate you or anything else for that matter. You help me a lot with information to help build my beloved Audi and I really appreciate you a lot!

Author:  varia [ Thu Dec 24, 2020 4:40 pm ]
Post subject:  Re: ISO: front and rear calipers and brackets

my recipe on the rear was for this 90, its has a two pieces suspension, it was a 20V car originally:
B5 A4q rear hub (New bearing, 75mm)
B5 S4 rear disk
B5 S4 rear brake caliper bracket
D2 S8 rear brake caliper, cos its aluminum (urs4/6, v8 rear can be used as well)
(I even used a front forged control arm on the rear)

Attachment:
IMG_20200202_153107.jpg
IMG_20200202_153107.jpg [ 2.19 MiB | Viewed 197 times ]


If your 80 had a 1 piece upright, i would upgrade that first.

Author:  RennenMsports [ Thu Dec 24, 2020 7:31 pm ]
Post subject:  Re: ISO: front and rear calipers and brackets

It actually came with 2 piece uprights and I just got 2 piece 82mm knuckles. Will the B5 A4q rear hub accept a front B5 S4 outer cv joint?

Author:  varia [ Thu Dec 24, 2020 9:30 pm ]
Post subject:  Re: ISO: front and rear calipers and brackets

" I just got 2 piece 82mm knuckles"
for the front. Rear is 75mm

or that where you want to use that bmw bearing, spacer combo?

"Will the B5 A4q rear hub accept a front B5 S4 outer cv joint?"
nope, but B3 80/90/cq/S2 cv/axle will fit

Author:  RennenMsports [ Thu Dec 24, 2020 10:03 pm ]
Post subject:  Re: ISO: front and rear calipers and brackets

The 75mm rear gets the BMW bearing with a 6mm spacer and a urs front hub machined down to about 42.2mm
Attachment:
DE0D4C90-A682-4FCF-BB14-053E34163608.png
DE0D4C90-A682-4FCF-BB14-053E34163608.png [ 747.66 KiB | Viewed 199 times ]

Author:  varia [ Thu Dec 24, 2020 11:20 pm ]
Post subject:  Re: ISO: front and rear calipers and brackets

RennenMsports wrote:
The 75mm rear gets the BMW bearing with a 6mm spacer and a urs front hub machined down to about 42.2mm
Attachment:
DE0D4C90-A682-4FCF-BB14-053E34163608.png


got it.

now the interesting part will be to find a caliper bracket, and disk that will fit because the diff. hubs (4-5mm)

Author:  RennenMsports [ Fri Dec 25, 2020 7:46 am ]
Post subject:  Re: ISO: front and rear calipers and brackets

He stated If I use urs6 rear brakes I can use a c5 s6/c5 A6 4.2l 269mm rotor
Attachment:
C9720FB7-C7C6-4BA1-A54B-B023D7E07420.png
C9720FB7-C7C6-4BA1-A54B-B023D7E07420.png [ 653.99 KiB | Viewed 190 times ]

Author:  varia [ Fri Dec 25, 2020 9:02 am ]
Post subject:  Re: ISO: front and rear calipers and brackets

rotor maybe, but still need matching caliper and caliper bracket to line up everything.
not many caliper has the good orientation to pull the e-brake cable

Author:  RennenMsports [ Fri Dec 25, 2020 9:48 am ]
Post subject:  Re: ISO: front and rear calipers and brackets

Will a rear urs caliper bracket bolt onto the rear of a B3? Merry Christmas by the way!

Author:  varia [ Fri Dec 25, 2020 10:04 am ]
Post subject:  Re: ISO: front and rear calipers and brackets

RennenMsports wrote:
Will a rear urs caliper bracket bolt onto the rear of a B3? Merry Christmas by the way!


Alone it might, but the offset of the ur4 hub and/or disk will make it hard to use


Merry Christmas to you too.

Author:  RennenMsports [ Sat Dec 26, 2020 3:41 pm ]
Post subject:  Re: ISO: front and rear calipers and brackets

varia wrote:
RennenMsports wrote:
Will a rear urs caliper bracket bolt onto the rear of a B3? Merry Christmas by the way!


Alone it might, but the offset of the ur4 hub and/or disk will make it hard to use


Merry Christmas to you too.

Ok. Thank u for your input! I appreciate it!

Author:  james12lucy [ Wed Dec 30, 2020 6:42 pm ]
Post subject:  Re: ISO: front and rear calipers and brackets

I have a set of URS6 front and rear drilled rotors and a set of rear calipers available.


Sent from my iPhone using Tapatalk

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/