motorgeek.com
https://www.motorgeek.com/

ABZ Fiero
https://www.motorgeek.com/viewtopic.php?f=6&t=48543
Page 35 of 36

Author:  A8myFiero [ Fri Jul 12, 2019 2:43 pm ]
Post subject:  Re: ABZ Fiero

thanks for the compliments as i know i love the look of the car and am glad other like the car as that means alot to me as since i was a young guy i always wanted a sports car that looked excotic and i think i have don it . i have been working on getting the mufflers tucked up and away so i have good ground clearance and are hidden from sight and right now it looks like they are going in at a 45 degree angle

Author:  A8myFiero [ Fri Jul 12, 2019 4:37 pm ]
Post subject:  Re: ABZ Fiero

My next project will be a VW passats W8 engine in a fiero as it should fit like it was made for the fiero

Author:  A8myFiero [ Tue Aug 20, 2019 5:22 pm ]
Post subject:  Re: ABZ Fiero

it has been awhile since i have been on but i have made some progress with the car I actually took it out for a drive today and it ran pretty good it has a few things that need to be done on the tuning and i would love to go back to EFI express and have Marc tune it but for now i will try to work the tuning out my self

Attachments:
20190820_125336.jpg
20190820_125336.jpg [ 241.93 KiB | Viewed 2053 times ]
20190820_125347.jpg
20190820_125347.jpg [ 209.33 KiB | Viewed 2053 times ]
20190820_125359.jpg
20190820_125359.jpg [ 233.58 KiB | Viewed 2053 times ]
20190820_125656.jpg
20190820_125656.jpg [ 280.56 KiB | Viewed 2053 times ]

Author:  90quattrocoupe [ Thu Aug 22, 2019 6:13 pm ]
Post subject:  Re: ABZ Fiero

Nice. You know, that Mark can tune remotely. You have wifi, hook up your computer and have him work his magic.

Greg W.

Author:  A8myFiero [ Fri Aug 23, 2019 3:20 am ]
Post subject:  Re: ABZ Fiero

I would need to go out and do some logging driving it on the street not really the smart thing to do on the street running it up 7000 rpm going through the gears i know doing that is fun as i have done it in the past but try not to do that stuff anymore i like to go to the race track to do that but the drag strip is just as far away as Mark is

Author:  A8myFiero [ Fri Aug 23, 2019 5:24 pm ]
Post subject:  Re: ABZ Fiero

worked on the exhaust and got some hangers on it and then i did one of the fastback inner trim parts that needed t be cut down i have not finished it yet but it is put back together using K tool Q-bond it works great i will do the driver side trim part tomorrow then all i need to do is make sure i smooth them out with filler and paint them with trim paint

Attachments:
20190823_145158.jpg
20190823_145158.jpg [ 135.58 KiB | Viewed 1997 times ]
20190823_145328.jpg
20190823_145328.jpg [ 196.62 KiB | Viewed 1997 times ]
20190823_145334.jpg
20190823_145334.jpg [ 223.98 KiB | Viewed 1997 times ]

Author:  A8myFiero [ Sat Aug 24, 2019 10:31 am ]
Post subject:  Re: ABZ Fiero

today i did the driver side fastback trim and now i just need to do all the body work them to smooth them all out then prime them and spray with trim paint

Author:  A8myFiero [ Thu Sep 05, 2019 7:39 am ]
Post subject:  Re: ABZ Fieroto /4

anyone running a megasquirt 3x can i ask what you set the gain at for your knock sensor i have set mine all to .5 as i had the gain to high and just sitting and running the car and reving it was setting off the knock sensor and retarding the timing but i know they should be a bit different for each cylinder as they are closer or further away from the knock sensor

Author:  A8myFiero [ Tue Sep 24, 2019 8:13 am ]
Post subject:  Re: ABZ Fiero

Not sure this will help anyone but i was messing around with the Water/methanol control on the megasquirt 3x and i found i had the Hz set wrong for the solenoid as i had it to high so it was not running the solenoid on lower duty cycle like 30 percent duty so i was not getting any injection at 5 pounds of boost but now that i have it working right i can make a map of how much water/meth i need at x amount of boost and rpm giving me a better methanol delivery for better performance

Author:  A8myFiero [ Mon Sep 30, 2019 1:03 pm ]
Post subject:  Re: ABZ Fiero

this is almost the finished look of the car exterior except rockers and maybe some black accents in the door cove area
Attachment:
20190930_102355.jpg
20190930_102355.jpg [ 1.43 MiB | Viewed 1805 times ]

Author:  A8myFiero [ Tue Oct 01, 2019 2:55 am ]
Post subject:  Re: ABZ Fiero

i don't understand why the picture is upside down in my last post

Attachments:
20190930_102330.jpg
20190930_102330.jpg [ 173.65 KiB | Viewed 1807 times ]

Author:  90quattrocoupe [ Wed Oct 02, 2019 8:48 am ]
Post subject:  Re: ABZ Fiero

Looks great.

Author:  A8myFiero [ Wed Oct 02, 2019 9:30 am ]
Post subject:  Re: ABZ Fiero

i need to go back down to see Mark at EFI Express to finish tuning it and dyno to see what it will do for number

Author:  90quattrocoupe [ Tue Oct 08, 2019 3:24 pm ]
Post subject:  Re: ABZ Fiero

Mark is a whiz.

Author:  A8myFiero [ Tue Oct 08, 2019 5:04 pm ]
Post subject:  Re: ABZ Fiero

He is smart but i saw a deal on a Dynamometer it is a mustang chassis dyno that was for emission testing but i am going to upgrade its software and eddy brake if needed videos and pictures are the dyno i bought
https://www.youtube.com/watch?v=1u33Yth ... AiigsVFpyw
https://www.youtube.com/watch?v=BFuMdMw ... upCy9h3wk0

Attachments:
66716785_891252665448_2817007227687141376_n.jpg
66716785_891252665448_2817007227687141376_n.jpg [ 198.6 KiB | Viewed 1714 times ]
67090576_891252505768_6176856827909636096_n.jpg
67090576_891252505768_6176856827909636096_n.jpg [ 159.36 KiB | Viewed 1714 times ]

Author:  A8myFiero [ Sun Oct 13, 2019 6:13 pm ]
Post subject:  Re: ABZ Fiero

chassis dynamometer is all picked up and in my shop i have much to do to get it running most of it is cleaning it up and making it pretty . I have talked to some who have the same dyno they say you can do up to around 500 whp that will cover what i want to do

Author:  A8myFiero [ Tue Oct 15, 2019 3:36 am ]
Post subject:  Re: ABZ Fiero

ok the 18 gauge sheet metal came in for the fiero rockers came in now i need to move the dyno so i can lower the fiero and make the rockers so this should happen in the next few weeks then she will be going to bed for the winter in the inclosed trailer i bought . life is good right now as i have a bunch of projects going on and i like it

Author:  90quattrocoupe [ Wed Oct 16, 2019 5:50 pm ]
Post subject:  Re: ABZ Fiero

Must be nice having a personal dyno. :D

Author:  A8myFiero [ Wed Oct 16, 2019 6:15 pm ]
Post subject:  Re: ABZ Fiero

it was cheap but it will do what i want as it is a old smog dyno with eddy brake, i need to spend $800 for software and data acquisition / brake controller and i have a 20 + foot camper trailer given to me the camper is junk ut the frame is strong and in great shape for mounting this dyno so i can travel with it and dyno a car if someone wants and the car owner can tune it or try to tune it

Author:  A8myFiero [ Wed Oct 23, 2019 3:44 pm ]
Post subject:  Re: ABZ Fiero

Since i bought the dyno i have been feeling like a little kid as i can't wait to get the fiero up on my new toy to tune it

Author:  A8myFiero [ Sun Nov 10, 2019 12:45 pm ]
Post subject:  Re: ABZ Fiero

today i got after it on striping the camper body off the trailer it is now off and just the floor is left but i think that will rip right off with the truck in 4 wheel low and a strap hooked on and just rip away it will be dyno ready soon

Author:  edigi [ Fri Nov 15, 2019 2:16 am ]
Post subject:  Re: ABZ Fiero

Been following along on the build. Awesome work!
A one of a kind car you have built here.
Definitely in for some dyno numbers.

Author:  A8myFiero [ Fri Nov 15, 2019 4:20 pm ]
Post subject:  Re: ABZ Fiero

i would love to do some dyno runs but now it is cold and we have just a little snow so it won't be until summer

Author:  A8myFiero [ Wed Nov 27, 2019 7:25 pm ]
Post subject:  Re: ABZ Fiero

Happy Thanksgiving everyone

Author:  sayoda [ Thu Nov 28, 2019 5:48 pm ]
Post subject:  Re: ABZ Fiero

Happy turkey day!!

Page 35 of 36 All times are UTC - 8 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/